Elcon Max Therm Heat Resistant Paint Aerosol (silver up to 700°C) 520 ml

Elcon Max Therm heat resistant paint aerosol (silver* up to 700°C), 520 ml.

Elcon Max Therm is a heat-resistant anticorrosive paint for the protective coating of: Heating stoves, heating pipes and radiators, smoke pipes and air ducts, exhaust pipes, boilers and fireplaces, smokehouses and grills, automotive brake calipers and other surfaces exposed to temperatures from -60°C to +700°C* during operation.

Properties:

• this paint can be used for painting interior surfaces, as it does not emit toxic fumes
• is resistant to the aggressive environment and does not require pre-priming - before application, the surface only needs to be mechanically cleaned from rust
• can be applied at temperatures as low as -30°C
• the estimated service life - up to 25 years
• thinning of the paint is allowed with the following agents: Elcon R, xylene, toluene up to 10% by weight.

Application tip: Stir the paint thoroughly and dilute with Elcon R, toluene or xylene, if necessary. Apply on the dry, previously cleaned and degreased surface with a brush, roller or paint sprayer in 1-3 coats with an intermediate drying time of 15 min at 20±2°C. Final drying time at 20±2°C - 24 hours. Consumption for one-coat application -120-160 g/m2.

Recommended layer thickness:

• from +700°C to +1200°C - 1 thin layer of 15-30 microns.
• from +300°C to +700°C - 2 thin layers of 30-50 micrometers
• 100°C to +300°C - 2 thick layers of 50-100 micrometers
• Up to +100°C - 3 thick layers of 100-150 micrometers

The thicker the layer, the higher the corrosion resistance, but the higher the heating temperature, the thinner the layer must be. If the permissible layer thickness is exceeded, cracking of the coating is possible
*Depending on the color of the enamel, the maximum operating temperature is 400-1200°C

Composition: polyorganosiloxane resin, pigments, fillers, aromatic hydrocarbons

Storage: Store the enamel in a tightly closed container and protect it from moisture, heat and direct sunlight. Keep away from fire! Keep out of reach of children.

Precautions:

Painting operations must be carried out in a well-ventilated area.
Personal protective equipment: Rubber gloves and respirator mask.