B-Ware TORNADICA tiller hand cultivator for garden and greenhouse

Tiller & cultivator: Buy garden tool for removing the roots of weeds

ATTENTION B-Goods: These are e.g. demonstration devices from studio recordings, returns, exhibition items and goods with cardboard damage.
B-Goods means: The devices are 100% functional. However, they may have SMALL optical defects. Excluded from return.

Your garden is riddled with weeds and you are tired of laboriously removing them by hand?

Does the soil in your garden need to be loosened up? The hand tiller from TORNADICA is your ultimate solution. You can buy the high-quality cultivator in our store. The following overview explains what it can do and how it can be used.

Hand tool with high precision: use in your garden

The cultivator is a garden tool equipped with a robust metal drum and special metal plates. There is also a blade behind the drum of the cultivator, which does the actual work - removing weeds. Carefully move the cultivator back and forth over the affected areas of your lawn. The hard clumps of soil are broken up in the process, loosening the soil. This allows it to breathe optimally again. At the same time, the cutter cuts the roots of the weeds. A special adjustable blade installed behind the drum loosens the soil to a depth of up to 5 cm and the width of the processing strip is 35-40 cm.

Buy a TORNADICA rotary tiller: Advantages at a glance

With the hand-held tool, you can work the soil in no time at all, which saves you a lot of time when gardening. The device also works extremely thoroughly and has a long service life thanks to its high-quality workmanship. The forward and backward movements make it easy to work the entire garden without straining your back.

Get your TORNADICA rotary tiller now!

An important feature

An important feature for comfortable use of the device is the ability to change the angle of the handle direction. The deviation range from the vertical axis is 20 degrees.
This allows you to move parallel to the processing strip without stepping on it when working with a "TORNADICA rotary tiller cultivator".

Assembly:

• assemble the tiller handle by aligning and fastening parts 1, 2, 3 (9 bolt and nut connections)
• Combine the assembled handle with part 4 (working part). Set the desired direction (vertical straight or vertical to the side) and use the bolts and nuts.
• Adjust the weed cutter on the working part to the required depth and fix its position with the screws. The rotary tiller is ready for operation. Clean the tool after use.