TORNADICA root remover innovative mini version of Culti weeder

Weeds in the garden? This hand - cultivator says the fight against unloved greenery.

The garden season is approaching and it's time to give the green idyll a fresh makeover?

To loosen the soil and remove weeds, an efficient tool is needed. In our store you can buy a cultivator with which you can gently remove the root, so that weeds do not grow back directly. With the hand cultivator from TORNADICA you buy a soil claw and soil tiller at the same time - a healthy soil is thus within reach.

Application TORNADICA tillers

A scaled-down version of the innovative Culti-Weeder Tornadica cultivator, to loosen the soil with the hand cultivator and remove the root from weeds, simply move the tiller over the area to be worked. The drum, equipped with sharp blades, moves as you push the soil claw in front of you. At the same time, you can adjust the angle of the cultivator to allow for lateral and sloping work (e.g., in trenches). The movement of the drum allows you to remove weeds and loosen the soil.

Buy TORNADICA cultivator and make gardening easier

The solidly made cultivator takes much of the physical effort out of your gardening work. Since you operate it standing upright, you don't have to worry about back pain. Moreover, you can reduce the time spent on gardening and enjoy your green oasis instead. Order your copy now!

Advantages of the innovative cultivator TORNADICA

• metal drum with metal plates
• special protective grids on the side of the drum prevent damage to the stems of your plants
• you can change the angle of inclination of the handle
• the range of deviation from the vertical axis is 20 degrees
• the width of the processed area - from 17 cm. to 20 cm
• with a back and forth movement you can loosen the soil between plants and remove weeds effortlessly

assembly:

• assemble the tiller handle by aligning and fastening parts 1, 2, 3 (9 bolt and nut connections)
• combine the assembled handle with part 4 (working part). Align them in the desired direction (perpendicular straight or perpendicular to the side) and use the bolts and nuts.
• On the working part, set the weed cutter to the required depth and fix its position with the screws. The tiller is ready for operation. Clean the tool after use.